|
When it comes to heavy duty axle scales design, GEC has the expertise and
knowledge to assist in your weighing needs. For over 40 years, GEC has led the
field in heavy-duty scale design and manufacturing
Three sizes and capacities from which to choose. Whether you choose the
MD700, MD1100, or MD1200, you are choosing high-performance scales designed to
withstand the rigors of routine and regulatory weighing. All the MD series
scales make use of a unique load cell design and are made of only the highest
quality materials resulting in consistent high accuracy, repeatability, and
longevity not found in similar scale systems. With a capacity up to 120,000
(split axle), GEC's transportable, semi-portable axle scales can handle
virtually any heavy truck weighing job almost anywhere.
Solid Aluminum Weigh Bridges can take high volume weighing without
fatigue or failure. They are made of solid, high-strength 6061-T6 aluminum -
eliminating down-time caused by welded steel bridge failures.
Patented Load Cell Design: GEC uses its patented Hydraulically Actuated
Electronic Load Cell (HAEL) to obtain highest accuracy. Hermetically sealed,
the HAEL load cells are moisture proof and provide pinpoint accuracy throughout
a wide temperature range. Self leveling by design, the load cells counteract
the effects of side loads due to surface irregularities.
Easy Setup: GEC semi-portables are proven as the most reliable and
trouble free axle scales available. Easy Setup is assured with GEC axle scales.
They are shipped fully assembled, and ready to use.
Box End Ramps: The GEC axle scales can be recessed in shallow pits for
semi- permanent applications. Simply replace the entry/exit ramps with the box
ends and install in the pit.
Transport Trailer: On person can install the axle scale system quickly
using the tilt-bed transport trailer. Equipped with storage/tool box and an
electric winch, the trailer makes unloading and loading the scales easy and
safe.
Weight Indicator WI300: This NTEP-approved instrument indicates on up to
4 channels. It has an accumulate feature and can be configured for either split
axle weighing or 200 truck in/out modes. The WI300 is self contained in a carry
case and can be equipped with either an internal or external printer to print
custom formatted weighing ticket forms.
|
Search
